Advanced Battery Systems Inc.


Stationary Chargers
Switch Gears: Features and Benefits: Latest Technology Power and Digital (µ-controller Based) Electronics Non linear load profile supply Ni-Cd or Lead acid batteries sized to IEEE or IEC Proven Reliable 30 years Design Soft start and Precision Regulation UL 1012 and CSA C22.2 107 Approved
Rated Power: < 120kW Applications: MV & HV Switchgear control Substations control PLC Few Others Options: Up to 3000 AH Ni-Cd or Lead Acid battery capacity Redundant / Parallel configuration Local and remote communication and control Integrated distribution panel Temperature compensation Standard 8 hours supply Comprehensive Alarm Panel Standard	Board Standard Electrical Specifications: Basic design features: UL/ANSI 1012 Listed, CSA C22.2 107.2 Certified and applicable IEC standard compliant ISO 9002-1994 Quality control compliant SCR (Thyristor) based rectifier c/w double wound isolation transformer

	Electronic control, current limiting and voltage regulation Alarm log, history and events Modular construction using the latest power and microelectronic devices Color coded PVC copper stranded wire for control and signals 30 year design, MTBF of 100 000 hours typical, MTTR less than 1
	Input:
	Standard voltages: Phases: Frequency Power factor Efficiency at full load	110, 120, 208, 220, 240, 380, 400, 480, 550, 575,and 600 VAC 1 and 3 phase 50 Hz or 60Hz 0.75 (1 phase), 0.85 (3 phase) at full load when tested on battery and resistive load Typical 87% (1 phase), 90% (3 phase)
	Output:
	Standard nominal voltage: Power AC ripple voltage	12, 24, 36, 48, 72, 125, 250, 380, 480 and 600 VDC From 60 W to 180 kW Standard P4500: 2% RMS when charger connected to a battery capacity 4 times its current P4500F: 1% RMS when charger connected to a battery capacity 4 times its current P4500T: 30mVrms / 32dBrnc weighted electrical voice band noise for up to 48VDC, 100mV for 125VDC and 200mV for 250VDC